Corporate
Training
Theory Course for Interprovincial Red Seal Welder Certificate of Qualification Examination: Trainees should have a minimum of 3 years employment as a welder in the Welding Fabrication Industry, or have worked for 3 years at an associated trade and performed welding. This course pinpoints and focus’s on exam subjects that candidates will need to know before writing the theory exam in order to obtain a Red Seal Certificate of Qualification (Licence) in Welding.
Evaluation Method: Trainees are given a closed book theory test, which they must receive 70% to pass.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Maintenance
Level I: This course is designed to introduce trades
persons, technicians or apprentices in a multi skilled environment
to the proper techniques of welding and flame cutting. Trainees
will demonstrate new and or improved skills on either S.M.A.W.
(stick) or G.M.A.W. (mig) and flame cut mild steel in a safe
and efficient manner.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Maintenance Level
II: This course is for trainees that
have successfully completed level I, or have documented past
welding experience (ie welding tickets). Trainees will demonstrate
new or improved skills enabling them to weld in all positions
using the S.M.A.W. (stick) welding process, preparing them
for welding certification based on the plant welding procedure.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Trainee will perform a plate bend test in all positions based
on the company welding procedures.
Please Note: Price of course does not include
CWB, TSSA, or AWS test cost.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Advanced Maintenance
Welding: This course is for trainees that have successfully
completed Level II or have documented on the job past welding
experience (ie. previous welding tickets or may have some
experience welding different alloys.) Trainees will upgrade
the skills by introducing them to cast iron, copper, and aluminum
maintenance welding.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Pressure Vessel
Welding: To prepare maintenance or production personnel
with extensive welding experience for pressure vessels branch
welding test, and updated skills in high pressure welding
techniques, and A.M.S.E. IX code requirements.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Trainee will also perform a practical T.S.S.A. welding test.
Please Note: Price of course does not include TSSA test cost.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Tool & Die
Welding ( TIG): This course is designed to upgrade
the skills and knowledge of Toolmakers and Apprentices with
some previous welding experience relevant to the welding of
various tools and dies used in production.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical Tool & Die welding assignment / test
will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Thermal Metal
Spray Welding: Thermal Metal Spray welding using oxy-fuel
gas and powdered metal is used in many industries such as
Petro-Chemical, Glass Making, Printing, and Pulp & Paper.
This process is used to prevent wear, rebuild worn pump shafts,
impellers, and bearing areas. Maintenance personnel trained
in the use of this process can reduce downtime and lower inventory
costs by applying spray welding techniques.
Trainees will be able to prepare surface areas, select the
correct alloyed metal powder type, select the correct Oxy-Fuel
Gas torch parameters, and execute correct spray welding techniques
on worn parts in a safe and efficient manner using both the
hot and cold thermal metal spray techniques.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Tungsten
Arc Welding (TIG) Level I: This course is designed
for maintenance, production, or apprentices, to teach new
welding skills using the G.T.A.W. (TIG) process. Upon completion
of this course trainees will demonstrate new welding skills
and a sound knowledge of the TIG process for entry level position
in Industry.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Tungsten Arc
Welding (TIG) Level II: To further upgrade maintenance
personnel in G.T.A.W. (TIG) welding process relevant to job
requirements upon completion participants will have a thorough
understanding of the TIG process and demonstrate more advanced
skills through both written and practical assignments.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment/test on pipe with purge will be
given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Tungsten Arc
Welding of Aluminum Alloys (TIG): Course description
coming soon
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Stainless Steel
Welding On G.M.A.W. or G.T.A.W.: This course is designed
for maintenance, supervisors, and production personnel, to
upgrade the skills and knowledge in welding of Stainless Steels
for plant maintenance and production requirements.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Metal Arc Welding
(Mig): This course is designed for maintenance workers,
supervisors and production personnel with no previous experience
in MIG welding variables. This course will give them a better
understanding of the Mig process and will also provide a brief
introduction to welding different alloys in the Mig process.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Metal Arc Welding
(Mig) Two day Course: This course is similar to the
five day Mig course although it is more intensive. Designed
for maintenance workers, shop supervisors, and production
personnel with previous welding experience to upgrade knowledge
and skills in the MIG welding variables, for shop welding.
This course will give them a better understanding of the Mig
process.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Metal Arc Welding
(Preparatory course for C.W.B. test): This course will
upgrade knowledge and skills of MIG welding variables and
prepare shop welders who are about to take the CWB MIG test.
(There has been a history of high failure rate in C.W.B. Mig
tests, compared to stick test. This course is designed to
increase the success rate of testing. Weldtech has a 95% pass
rate on all CWB Mig testing.)
Evaluation Method: Trainees will be given
a C.W.B. test based on your company procedures. This course
is 80% Practical and 20% Theory.
Please Note: Price of course does not include
CWB test cost.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Gas Metal Arc Welding
of Aluminum Alloys (M.I.G.): Course description coming
soon
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Resistance Welding:
This course is based on the ANSI approved standards
for resistance welding formulated by the American Welding
Society referred to as the AWS C1.1 code for resistance welding.
It will give related welding personnel a good understanding
and knowledge of resistance welding theory.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Robotic Arc Welding
Quality Standards: Designed to teach new skills and
upgrade knowledge of robotic programmers/welding technicians
and senior welding department personnel in Mig welding quality.
(In compliance with the latest S.A.E. and A.W.S. weld quality
standards D8.8.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Welding For Supervisors:
Course description coming soon
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Weld Quality Control
& Inspection: Designed to give quality control
and welding team members new skills and knowledge in evaluating
welds related to current and future plant needs.
Please Note: First day at Weldtech Training
Facility and second ½ day In-plant. A maximum of 8
trainees and a minimum of 6.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Oxy-Acetylene &
Arc welding Safety: Designed to ensure employees including
supervisors who may come in contact with cutting and welding
equipment are educated in the potential hazards of such equipment.
In conformance with C.S.A. standards W117.2 and the Ontario
fire Marshals Office.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Technical Sales
– Welding processes & Consumables: This is
a unique course which is designed to give knowledge and skills
to those employed by welding distributors and manufacturers
employed as either inside or outside sales personnel. A strong
emphasis will be placed on selling techniques and product
demonstration skills to link newly attained knowledge and
skills to practical applications.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
Blue Print Reading & Precision
Measuring Devices: This course is designed to teach
trainees how to read and interpret basic industrial drawings.
As well they will also be taught to read and use precision
measuring devices.
Evaluation Method: Trainees are given a
closed book theory test, which they must receive 70% to pass.
Also a practical assignment will be given.
For more information regarding courses or to obtain a course
outline please contact us at (905) 567-1388 or e-mail us at info@weldtechtraining.com.
[ top ]
|
